Supplies:

• 12 x 12 frame
• Cricut Cartridge
• Black vinyl
• Transfer tape
• Piece of patterned paper
• Gypsy or DesignStudio by Provo Craft

Instructions:

1. Using the Gypsy, make the letters 1” tall.

2. Type the words into the Gypsy, and arrange them together. Using the Gypsy, play around with the letters and words until you find what you want.

3. Spaced them apart and use the 12x12 mat and imagine the mat as your piece of paper. Because the frame that I used was a 12 x 12 frame, the paper fits perfectly.

4. Decide what the vinyl is going to look like and cut it out on your Cricut machine.

5. Once it is cut out, use the pick from your Cricut Tools set to “weed” out the extra vinyl, so all that is remaining is the positive image on the sheet.

6. Next, take the transfer tape and separate the sticky side from the smooth side. Line up the sticky side on top of the vinyl and press down and burnish the vinyl on the transfer tape.

7. Peel off the transfer tape, making sure the letters are stuck on the transfer tape.

8. Place the transfer tape on top of the sheet of 12 x 12 paper.

9. Burnish all of the letters onto the 12 x 12 sheet of paper.

10. Pull off the transfer tape, making sure all the letters remain on the 12 x 12 sheet of paper.

11. Put the piece of paper inside your frame. Secure the back of the frame.

12. Use a dry erase marker to write your menus on the glass. When the week is over, you can erase them with a dry erase marker or a paper towel. If the marker doesn’t easily come off, you can use a baby wipe to clean the glass.


Supplies
 
Online Payment Service